Heavy Machining Oil ISO 36 EASYCUT NMO361 - 55 Gallon

NMO361-55Running out of stock

CA$1,704.42

CA$1,739.20

Std. delivery incl. Crossed-out price = offline retail

1 pcs.in stock in Calgary (T2C 1Z6)

Product Attributes

Documents (PDF)

Technical Description

Reviews

Kin. Viscosity at 40 °C [mm²/s]

Workpiece Material

P - Steel, N - Non-Ferrous, K - Cast Iron, H - Hardened Materials, M - Stainless Steel, S - High-Temp Alloys

Application

High Performance

Size

208l / 55gal

Mineral oil content, %

Neat Oil

Brand

EASYCUT

Item type

Cutting Oils

Documents (PDF)

PDF

NMO361 Fiche de Données de Sécurité PDF

NMO361 Product Information Data Sheet PDF

NMO361 Safety Data Sheet English

Technical Description

Short Description

Mineral oil-based high viscosity multipurpose neat metalworking oil NMO361 is used undiluted for heavy duty machining, incl. gear cutting manufacture.

Composition Features

Does not contain chlorine

Product Properties / Advantages

High surface finish and low tool wear due to optimally balanced EP additives
Excellent stability against ageing and oxidation
Low drag out

Technical Data

Appearance: Brown, Clear
Density at 15 °C [kg/m3]: 883
Kinematic viscosity at 40 °C [mm2/s]: 36
Flash point [°C]: >210
Corrosion of copper (3 hours / 100 °C): 1b (slight tarnish)

Recommendations / Features

Mixing with other mineral-based neat cutting oils of similar viscosity is generally feasible without adverse effects. However, EASYCUT representatives do not assume responsibility for any potential incompatibility with products from other manufacturers. To ensure compatibility, it is recommended to perform a preliminary test by mixing a small quantity of the two oils in a transparent container. If no phase separation is observed after 24 hours, the products can be safely mixed in a machine.

Reviews

You must be logged in to leave a review.